-
The new Eubanks Model 8900 is equipped with very powerful maintenance-free, high-precision brushless motors. The 8900 will handle from delicate 32 AWG and up to heavy thin stranded 2 AWG (33.6mm²) battery cable or welding wire, without a struggle. This covers the complete wire spectrum of the most popular wire sizes used in the industry. The 8900 is the only machine one needs. Eubanks 8900 is more powerful with greater reliability; it is the fastest and most versatile of the AutoStrip machines. Aside from the extended 32-2 AWG capacity, the 8900 also does an excellent job of cutting and stripping flat cable and multi-conductor cable up to 9/16” (14mm) in diameter. Strip lengths are almost unlimited. It can produce strip lengths of up to 20” (500mm) on both ends. The 8900 uses larger, thicker, long-lasting, high-quality tool steel blades. Eubanks provides a cassette loading tool for easy and quick blade insertion. Blade changeover is done in seconds, without any need for calibration or blade fastening. The 8900 can be programmed to do step-stripping, batch counting, and center-stripping. It can also be programmed to operate with a single drive and blade set (Blade Mode 1). Under Blade Mode 1, the 8900 can cut and strip short-length wire jumpers down to an incredible 1/8” of an inch (3mm), with a .050” strip on each end. The 8900 has a 99-program storage capacity. For unlimited storage and maximum productivity, the Eubanks 8900 can be controlled with a PC or Laptop, using the Eubanks WireManager for Windows software. Download the Eubanks Engineering AutoStrip 8900 specifications for more detailed information. Click here for details on ordering supplies like blades and tools. -
The new Model 7600 is as rugged and powerful as the model 8900. It covers a complete range of wire sizes from 32 through 6 AWG thin-stranded wires. If you are searching for a reliable wire processor that will serve for years and your production needs are from small to medium size wires, the 7600 excels at this range, doing either high-mix & low-volume or high-volume, low-mix. The Model 7600 uses high-quality tool steel blades. Eubanks provides a cassette loading tool to insert the blades on the machine. Blade changeover is done in seconds without the need for calibration or blade fastening. It will cut and strip wires up to 6 AWG (13.5mm²) thin stranded wire and up to 12 AWG (3.3mm) solid wire. The 7600 is ideal for communication cables such as Cat 5 & 6. It will process multi-conductor cables up to 5/16” (8mm) in diameter. The model 7600 can also produce long strip lengths of up to 20” (500mm) on both ends. Blades are also available for flat cable and parallel conductor wires. The 7600 is also a great choice for cutting medical hose tubing to precise lengths. The Eubanks blades for the 7600 are made of high-quality tool steel. The 7600 can be programmed to do step-stripping, batch counting, and center-stripping. It can also be programmed to operate the single left drive and blade set (Blade Mode 1). With Blade Mode 1, the 7600 can cut and strip short-length wire jumpers down to an incredibly 1/8” of an inch(3mm) and with a .050” strip on each end. The 7600 has a 99-program storage capacity. For unlimited storage and maximum productivity, the Eubanks 7600 can be controlled with a PC or Laptop, using the Eubanks WireManager for Windows software. Download the Eubanks Engineering AutoStrip 7600 specifications for more detailed information. Click here for details on ordering supplies like blades and tools. -
The new 4900 (-21 & -22) is now equipped with a more powerful brushless cut motor. The new high-precision motor provides more longevity and less maintenance. It will cut through 10 AWG stranded wire and ¼” Multiconductor cable effortlessly and will precisely strip small delicate 32 AWG wires. The 4900 has a compact, rugged design perfect for small shops or any department within the company. The 4900 has an excellent reputation for its long service life, reliability, precision, and ease of maintenance. The 4900 is equipped with high-quality tool Steel blades. Custom blades are also available for stripping out-of-round cables, parallel conductor wires, and flat cables. The 4900 comes with a built-in blade loading tool that ensures correct blade installation. The blade changeover is done in seconds without the need for calibration or blade fastening. The 4900 can be programmed to do step-stripping, batch counting, and center-stripping. It can also be programmed to operate in short-length mode. In short-length mode, the 4900 can cut and strip wire jumpers down to an incredibly 1/8” of an inch(3mm) and with a .050” strip on each end. The 4900 has a 99-program storage capacity. For unlimited storage and maximum productivity, the Eubanks 4900 can be controlled with a PC or Laptop, using the Eubanks WireManager for Windows software. Download the Eubanks Engineering AutoStrip 4900 specifications for more detailed information. Click here for details on ordering supplies like blades and tools. -
Our flagship pneumatic stripper, the 2700, is a high-speed machine that can handle almost anything you can throw at it. Equipped with the standard tooling, the 2700 can cut and strip solid and stranded conductor wires ranging from 22 AWG (0.38mm2) up to 10 AWG (5.3mm2). With optional tooling and modification kits, it can process wires from 32 (0.03 mm2) to 8 AWG (8.6mm2), with a max. O.D. of .290 in. (7.4mm). The 2700 can also process a wide variety of cable types such as round or flat multi-conductor cable, parallel conductor cable with 2, 3, or 4 conductors, can strip coaxial cable in 2 stages, and cut and strip fiber optic cables made of plastic or glass and even with Kevlar reinforced fibers. It’s so flexible that it can precisely strip and slit 2 and 3 parallel conductor wires. With special setups, it can do an offset strip on 2 parallel conductor wires. Wire lengths are not a problem it will measure and cut lengths up to 99,999,99 inches, basically a mile and a half. Download the Eubanks Engineering AirStrip 2700 specifications for more detailed information. New Customers: Click here for information on ordering blades and blocks. Existing Customers: Click here for information on order blades. Existing Customers: Click here for information on order blocks.Speed
The 2700 cuts and strips both ends of the wire or cable in a single cycle and does this at blinding speeds of up to 10,300 pieces per hour. The 2700’s production screen can display the estimated pieces per hour being produced at the current feed speed. The production screen also displays an estimated time of completion. Because of its versatility and speed, the AirStrip 2700 is our most popular pneumatic stripper.User Friendly Programming
The 2700 is microprocessor-controlled, highly reliable, and easy to operate. It stores up to 1,000 programs containing separate wire parameters. It has built-in wire marking controls for pairing a wire marker. From its console, the operator can select and run programs, and step the machine through a complete cycle. It can easily be converted from inch to metric measurements via the machine’s keyboard. It has self-diagnostics. It also has length correction compensating fields designed to fine-tune to the best exact length tolerance possible.High-Precision
Our pneumatic strippers use unique hand-machined precision die blades and blocks. The tooling setups will last years and deliver the best quality strip available. During the strip function, the custom blades butt up against one another cutting perfectly around the circumference of the conductor. During the pull to strip, the insulation is held perfectly by both the top and bottom strip blades for a perfect linear pull when stripping. The result is a perfect 180° square cut of the insulation without any damage to the conductor ideal for proper termination. We design and manufacture all our blades using our proprietary processes. These processes assure high-precision performance over a long service life. This is where Eubanks excels. We can design special tooling to cut, strip, and slit on parallel wires and offset stripping. Customers have learned to rely on our extensive strip-blade expertise as they adapt to new insulations and tough applications. -
The 2940 is the largest and most powerful cable stripper Eubanks manufactures. It is equipped with a powerful cutter head that generates up to 1,800 P.S.I. (12,000 kPa). It is designed specifically for processing hard-to-strip large battery cables. Equipped with the standard tooling, the 2940 can cut and strip single-stranded conductor wires ranging from 10 to 2AWG (5.3mm2 up to 33.6mm2), with a maximum O.D. of 480” (12.1mm). Now with extended capacity using optional tooling and modification kits, the 2940 can process wires down to 18 AWG (0.96 mm2) and up to 2/00 AWG also known as 2 Ott, with a maximum O.D. of .625” (15.8mm). The 2940 can also process a wide variety of cable types such as round or flat multi-conductor cables, parallel conductor cables with 2, 3, or 4 conductors, and coaxial cables. Wire Length is not a problem it can process wire lengths from 3 in. to 8,333 feet (101.6mm to 2,540m) basically a mile and a half. The 2940 cuts and strips both ends of the wire or cable in a single cycle. It strips perfectly square ideal for termination. The 2940’s production screen can display an estimate of pieces per hour being produced at the current feed speed. The production screen also displays an estimated time of completion. Download the Eubanks Engineering AirStrip 2940 specifications for more detailed information. New Customers: Click here for information on ordering blades and blocks. Existing Customers: Click here for information on order blades. Existing Customers: Click here for information on order blocks.User-Friendly Programming
The 2940 is microprocessor-controlled, highly reliable, and easy to operate. It stores up to 1,000 programs containing separate and different wire lengths and batch profiles. The 2940 has built-in wire marking controls for pairing with a wire marker. From its control panel, the operator can select and run programs, step the machine through a complete cycle, and switch from single to multiple actions. It can easily be converted from inch to metric measurements via the machine’s keyboard. It has self-diagnostics. It also has length correction compensating fields designed to fine-tune to the best length tolerance possible.High-Precision
Our pneumatic strippers use unique hand-machined precision die blades and blocks. These setups will last years and deliver the best quality strip available. During the strip function, the blades butt up against one another cutting perfectly around the circumference of the conductor. During the pull to strip, the insulation is held perfectly by both the top and bottom strip blades giving a perfect linear pull when stripping. The result is a perfect 180° square cut of the insulation without any damage to the conductor. We design and manufacture all our blades using our proprietary processes. These processes assure high-precision performance over a long service life. This is where Eubanks excels. We can design special tooling to cut, strip, and slit on parallel wires and offset stripping. Customers have learned to rely on our extensive strip-blade expertise as they adapt to new insulations and tough applications. -
The 4040 is as powerful as the 2940 and is the most flexible of the air strippers. Equipped with very powerful tandem-cutterheads that are controlled independently, allows you to strip up to 100” on the leading end and 4” on the trailing end. The 4040 is ideal for processing power cords and will also process automotive battery cables or welding cable. Equipped with the standard tooling, the 4040 can cut and strip single stranded conduct wires ranging from 10 to 2 AWG, with a maximum O.D. of .480” (12mm). With optional tooling and modification kits, the 4040 can process wires down to 18 AWG (0.96 mm2) and up to 2/0, also known as Two Ott cable with a Max Diameter of .625” (15.9mm). The 4040 can also process a wide variety of cable types such as flat multi-conductor cable, parallel conductor cables with 2, 3 or 4 conductors, coaxial cable. It can process wire lengths from 3 in. to 8,333 feet (76.2mm to 2,540m) basically a mile and a half. The 4040 cuts and strips both ends of the wire or cable in a single cycle in normal operation mode. When activating the long strip function, the right cutter head will strip up to 100” (254cm) in desired sectional stripping lengths. The left Cutterhead strips the trailing end up to a maximum length of 4” (102mm). The 4040’s production screen can display the estimated pieces per hour being produced at the current feed speed. The production screen also displays an estimated time of completion. Download the Eubanks Engineering AirStrip 4040 specifications for more detailed information. New Customers: Click here for information on ordering blades and blocks. Existing Customers: Click here for information on order blades. Existing Customers: Click here for information on order blocks.User Friendly Programming
The 4040 is microprocessor-controlled, highly reliable, and easy to operate. It stores up to 1,000 programs containing separate wire length, batch quantity profiles. The 4040 has built in wire marking controls for pairing with a Eubanks wire marker. From its console, the operator can select and run programs, step the machine through a complete cycle, and switch from single- to multiple-action. It can easily be converted from inch to metric measurements via the machine’s keyboard. It also has self-diagnostics. It also has length correction compensating fields designed to fine tune to the best length tolerance possible.High-Precision
Our pneumatic strippers use unique hand machined precision die blades and blocks. These setups will last years and deliver the best quality strip available. During the strip function, the blades butt-up against one another cutting perfectly around the circumference of the conductor. During the pull to strip, the insulation is held by perfectly by both top and bottom strip blades giving a perfect linear pull when stripping. The result is a perfect 180° square cut of the insulation without any damage to the conductor. We design and manufacture all our own blades using our proprietary processes. These processes assure high-precision performance over a long service life. This is where Eubanks clearly excels. We can design special tooling to do cut, strip and slit on parallel wires and offset stripping. Customers have learned to rely on our extensive strip-blade expertise as they adapt to new insulations and tough applications. -
Versatile Precision Semi-Automatic Bench Stripper
The model 3751 wire and cable stripper is fast versatile and easy to use. The 3751 is ideal from simple low volume applications to relieve operators from hand stripping and up to no nick or scrape precision stripping. The 3751 can quickly strip accurately single conductor wires and many other cable types. It excels in reworking cables to the correct strip length and stripping the end of a pre-molded multi-conductor power cable. Using the special multi-conductor strip package the 3751 can strip the inner conductors of a multi-conductor cable in a single pass. The 3751 is 100% pneumatic and very powerful. It can strip the plastic coating off pre-cut to length steel rope and also strip up to 2 AWG (33.6mm²) battery cable. There is a wide variety of tooling for most manufacturing cables that can be adapted to this small bench-stripper. Download the Eubanks Engineering 3751 Wire & Cable Stripper specifications for more detailed information.User Friendly
There is no learning curve required with the 3751. The machine is activated by stepping on an air operated footswitch which comfortably frees the operator’s hands. To strip a wire, simply insert the end to be stripped on the slot located in front of the 3751 or drop from the opening above. Once the wire is in position, step on the foot switch and that is all. The 3751 will automatically clamp the wire as the strip blades cut the insulation and then will fully remove it or leave it at the end semi-stripped. Blade change is done in seconds. To change the blades, simply turn the air off, remove the top plastic guard, remove the two blade pins and change the blades. To change the strip length, simply loosen the screw on the clamp that holds the wire stop, reposition the wire stop to the desired length and retighten the clamp screw.High-Precision
Our pneumatic strippers use unique hand machined precision die blades and blocks. These setups last years, and deliver the best quality strip available. During the strip function, the blades butt-up against one another cutting perfectly around the circumference of the conductor. During the pull to strip, the insulation is held by perfectly by both top and bottom strip blades giving a perfect linear pull when stripping. The end result is a perfect 180° square cut of the insulation without any damage to the conductor. We design and manufacture all our own blades using our proprietary processes. These processes assure high-precision performance over a long service life. This is where Eubanks clearly excels. Customers have learned to rely on our extensive strip-blade expertise as they adapt to new insulations and tough applications. -
The Eubanks AutoTab Wire Marking System comprises a series of computer-controlled machines whose printing discs are set automatically, along with wire length, batch count, distance between marks, air pressure, dwell time, wire drive speed, and acceleration and deceleration rates. A monitor displays all computer-controlled functions, which may be changed from the keyboard or from a host computer. One of these, the Model 77200 AutoTab, operates in line with an AutoStrip Automatic Wire Stripper. The Model 77200 AutoTab is a fully programmable hot stamp wire marker that operates in line with the AutoStrip. It links production planning software and wire processing to provide you with completely automatic marking, cutting and stripping. The Model 77200 selects marking characters quickly and accurately and places marks along the wire exactly where you want them. Printing discs are set automatically, along with stamp pressure, dwell time, distance from the end of the wire to the first mark and distance between marks. Temperature is set manually. The Model 77200 AutoTab includes Eubanks' WirePro for Windows software, which enables you to create large wire list files on your PC and provides direct, error-free downloading of wire list data from the PC to the AutoStrip and the 77200. It provides instant recall of previously run wire lists and it prompts the operator to select the correct wire type, color and gauge when changing wires. The WirePro for Windows software is easy to understand and was designed so that non-technical personnel can operate the 77200. It uses simple dialog boxes to enable the operator to select a wire file, download it to the AutoStrip and the AutoTab and start production. The operator can interrupt production at any time. When a wire-fault has been detected by the splice detector or the optional 64055 Spark Tester, the PC's monitor displays a fault-recovery dialog box that provides the operator with various options for resuming production. -
This machine does not have feed rolls to drive the wire. Wire is pulled through the machine manually or by an automatic wire stripper equipped with marker controls. It may be used with a Eubanks Automatic Wire Stripper equipped with marker controls for either end-marking or continuous marking at set intervals. An AutoStrip machine, when used with a Model 67200, provides the same control of mark placement as the AutoTab Wire Markers. The marking discs may be separated into two groups when the machine is used for end-marking. When used for end-mark- with a Eubanks AutoStrip, Model 2700 IV, or -V, or Model 1000-II, -III, or -IV Automatic Wire Stripper, the marker need not be repositioned when wire lengths are changed. When used with an earlier model Eubanks wire stripper for end-marking, the marker must be repositioned when wire lengths are changed. A traveling rack and dolly is available for this purpose. In the semi automatic mode, the operator pulls the wire or tubing through by hand and presses a foot switch to operate the Model 67200. -
Additional standard vertical marking discs are available part no. 60430-11 (204 Radius). Also available split disc tooling kits -
Foils are available for marking all of the commonly used insulations such as Teflon, PVC, Kapton, etc. A list of various sizes and types is available separately. -
The Eubanks 4600 is a proven workhorse and one of the most versatile products Eubanks manufactures. The 4600 is one of the few machines that serve many industries such as Aerospace, Automotive, Medical, and Manufacturing. The 4600 can measure and cut most soft linear plastics or metals. It can cut hose tubing with a maximum diameter of .375” (9.5mm). It will also process flat materials such as shrink tubing or ribbon cable up to 3” (76.2mm) wide or when flatten. Equipped with optional carbide cutting blades the 4600 can also cut Kevlar reinforced Fiber Optic Cables. The 4600-03 is designed with a few robust moving parts, making it very reliable and durable. Blade and Drive Roller changes are easy and require minimal tools. Speed and Precision The 4600 can cut materials up to 23,200 pieces per hour of 1/8” (3.1mm) in length. The 4600 can also maintain a tolerance of ± .020” (.5mm). User-Friendly Programming The 4600 has no learning curve, simply insert the material between the two drive rollers and press the cut button to zero out. Enter a cut length and a batch quantity and press the go button. The watch as the 4600 does its work at blinding speeds. That is how simple it is to operate. The 4600 has a quick locking cam lever for raising the top drive roller for easy material insertion. Eubanks offers control panels in 6 different languages, English, Spanish, French, German, Swedish, and Italian. For more information please download Eubanks Engineering's Model 4600 Tubing and Flat-Cable Cutter product specifications.
