 |
|
 |
 |
 |
 |
 |
 |
 |
 |
Next largest in size, the Model 7400 is a rugged, versatile machine. Like the Model 8000, it is capable of producing extremely long strip lengths. If you are cutting a cable to 12-foot lengths and want to strip 12 inches of insulation from one end and 20 inches from the other, key in those strip lengths and the 7400 will oblige. It can produce a maximum strip length of 20" x 20" (500mm x 500mm).
The 7400 can be programmed to do step-stripping, batch counting and center-stripping. The Model 7400 uses the same Eubanks blades as the Model 4900 and uses a cassette to insert the blades. It differs from the 8000 in the maximum wire and cable sizes it will handle. The 7400 will cut and strip wire up to 8 AWG (8.6mm2) and multi-conductor and flat cable up to 5/16" (8mm) wide.
DIMENSIONS:
13"H x 26"W x 22"D
(330mm x 660mm x 560mm)
WEIGHT:
Net: 1441b. (66kg)
Shipping: 2351b. (107kg)
PRODUCTION RATES
The production rates of the Model 7400 vary with wire length, strip length, wire size, blade back-up and wire drive speed and acceleration rates. The maximum production rates for 18 AWG wire (0.82mm2) with a 1/4" (6mm) semi-strip on each end are:
| Strip
Both Ends pieces per hour |
Cut
Only pieces per hour |
|||
| Wire Length | Single wire | Dual wire | Single wire | Dual wire |
| 4" (100mm) | 4,100 | 8,200 | 7,300 | 14,600 |
| 20"(500mm) | 3,400 | 6,800 | 5,300 | 10,600 |
| 40" (1M) | 2,700 | 5,400 | 4,000 | 8,000 |
| 100"(2.5M) | 1,800 | 3,600 | 2,300 | 4,600 |
| 394"(10M) | 600 | 1,200 | 720 | 1,440 |
| 600"(15M) | 400 | 800 | 480 | 960 |
| 1200"(30M) | 250 | 500 | 260 | 520 |