Model 4900

Programmable wire strippers
Model 8000 wire stripper Model 7400 wire stripper Model 4900 wire stripper
pneumatic wire strippers
wire markers
semi-automatic wire strippers
wire stripper accessories
tubing and flat cable cutters
wire processing software
wire harness testers
 

Eubanks Model 4900 AutoStrip wire processing machine.

The Model 4900 is a compact AutoStrip, a small machine with big machine performance. Like its stable mates, it will cut and strip wire as small as 32 AWG (0.03mm2). It will handle wire as large as 10 AWG (6mm2) and flat cable and multi-conductor cable up to 1/4" (6mm) in diameter or width.

The Model 4900 uses the same Eubanks blades as the Model 7400. Strip lengths range from 1/32" x 1/32" to 2 1/2" x 2 1/2" (0.8mm x 0.8mm to 64 x 64mm). In other words, it covers most wire prep requirements. A compact tool is used to load the blades into the 4900. The 4900 can be programmed to do step-stripping and batch counting.A small tool is used to load the blades into the Eubanks  Model 4900's blade holder.

DIMENSIONS:

12"H x 20"W x 18"D

(305mm x 508mm x 460mm)

WEIGHT:

Net: 75 lbs. (34kg)
Shipping: 125 lbs. (57kg)

PRODUCTION RATES

The Model 4900 production rates vary with wire length, strip length, wire size, blade back-up and wire drive speed and acceleration rates. The maximum production rates for 18 AWG wire (0.82mm2) with a 1/4" (6mm) semi-strip on each end are:

 
  Strip Both Ends
pieces per hour
Cut Only
pieces per hour
Wire Length Single wire Dual wire Single wire Dual wire
4" (100mm) 3,100 6,200 5,000 10,000
20" (500mm) 2,500 5,000 3,600 7,200
40" (lM) 2,000 4,000 2,800 5,600
100" (2.5M) 1,300 2,600 1,600 3,200
394" (10M) 500 1,000 525 1,050
600" (15M) 320 640 330 660
1200" (30M) 180 360 190 380

Model 8000 | Model 7400 | Model 4900

   
   
HomeProductsPrintable Product BrochuresU.S. Sales Reps
International Sales Reps
Contact EubanksApplicationsTrade Shows
About EubanksEmployment Wire Harness TestersEmailSite Map