AutoStrip 4900

The Model 4900 is a compact AutoStrip, a small machine with big machine performance. Like its stable mates, it will cut and strip wire as small as 32 AWG (0.03mm2). It will handle wire as large as 10 AWG (6mm2), and flat cable and multi-conductor cable up to 1/4″ (6mm) in diameter or width.

The Model 4900 uses the same Eubanks blades as the Model 7400. Strip lengths range from 1/32″ x 1/32″ to 2, 1/2″ x 2, 1/2″ (0.8mm x 0.8mm to 64 x 64mm). In other words, it covers most wire prep requirements.  A compact tool is used to load the blades into the 4900. No calibration is required with blade change.  The 4900 can be programmed to do step-stripping, mid-stripping and batch counting.

Download the Eubanks Engineering AutoStrip 4900 specifications for more detailed information.

Click here for details on ordering supplies like blades and tools.



12″H x 20″W x 18″D
(305mm x 508mm x 460mm)


Net: 75 lbs. (34kg)
Shipping: 125 lbs. (57kg)


The Model 4900 production rates vary with wire length, strip length, wire size, blade back-up and wire drive speed and acceleration rates. The maximum production rates for 18 AWG wire (0.82mm2) with a 1/4″ (6mm) semi-strip on each end are:

Strip Both Ends (pieces/hour) Cut Only (pieces/hour)
Wire Length Single Wire Dual Wire Single Wire Dual Wire
4″ (100mm) 3,100 6,200 5,000 10,000
20″(500mm) 2,500 5,000 3,600 7,200
40″ (1M) 2,000 4,000 2,800 5,600
100″(2.5M) 1,300 2,600 1,600 3,200
394″(10M) 500 1,000 525 1,050
600″(15M) 320 640 330 660
1200″(30M) 180 360 190 380

Get In Touch

1921 S. Quaker Ridge Pl.
Ontario, CA 91761

Phone: 909.483.2456

Fax: 909.483.2498

  • This field is for validation purposes and should be left unchanged.
Go to Top