 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Marking foil comes in various widths
WIRE MARKING DISCS - Wire marking discs have concave type. They are made in various character sizes to cover a range of wire diameters. Both vertical reading and horizontal reading characters are available.
| Type of disc |
Catalog number |
Minimum* Wire O.D. |
Type Samples | Radius | Character Height |
Character Width |
|---|---|---|---|---|---|---|
| 204 Radius | 60430-11 | 0.035" |  |
0.026" | 0.065" | 0.025" |
| 205 Radius | 60431 | 0.060" |  |
0.031" | 0.075" | 0.045" |
| 104 Radius | 63504 | 0.060" |  |
0.027" | 0.036" | 0.058" |
| 105 Radius | 63505 | 0.070" |  |
0.031" | 0.041" | 0.065" |
| 106 Radius | 63626 | 0.080" |  |
0.037" | 0.060" | 0.060" |
| 107 Radius | 63627 | 0.090" |  |
0.044" | 0.070" | 0.070" |
| 108 Radius | 63628 | 0.110" |
|
0.062" | 0.080" | 0.080" |
Character sizes shown are not to scale, but are for reference purposes only.
* The minimum or maximum wire O.D. (Outside Diameter) for each disc depends on the softness of the insulation.
#60431 discs have a character width of 0.045" and can be used only for wire sizes 0.060 O.C or larger. #60430-11 discs have a character width of 0.025" and are required for wire sizes smller than 0.060"
FLAT-FACED MARKING DISCS - Flat-faced marking discs have flat-faced type. They are used for marking heat-shrink tubing and large diameter wires and cables.
| Type of disc |
Catalog number |
Minimum* Wire O.D. |
Type Samples | Character Height |
Character Width |
|---|---|---|---|---|---|
| .050FF | 63645 | 0.070" |  |
0.050" | 0.050" |
| .060FF | 63646 | 0.080" |  |
0.060" | 0.060" |
| .070FF | 63647 | 0.090" |  |
0.070" | 0.070" |
| .080FF | 63648 | 0.100" |  |
0.080" | 0.080" |
| .090FF | 63649 | 0.110" |  |
0.090" | 0.090" |
| .125FF | 63641 | 0.145" |  |
0.125" | 0.105" |
Character sizes shown are not to scale, but are for reference purposes only.
MARKING FOIL Foils are available for marking all of the commonly used insulations, such as Teflon, PVC, Kapton, etc. A list of various sizes and types is available separately.
Vertical reading disc #204 is the most commonly used type. They are made in various character sizes to cover a range because the vertical positioning allows the use of taller characters of wire diameters. Both vertical reading and horizontal reading with increased legibility over a wide range of wire diameters. characters are available.
TECHNICAL ASSISTANCE - For assistance in selecting the correct marking discs, anvils, and foils for your wires, please send samples of your wires and a letter requesting help to our Wire Marking Applications Department at the address on our contact page, or fill out the online "Request for Quotation/Recommendation" form.