 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Special tandem cutterhead enables combined strip lengths of up to nine inches (229mm) in normal mode and a strip length of up to 100 in. (1,000mm) on the leading end in step-strip mode. | |
Designed primarily to meet power-cord production requirements, this tandem cutterhead machine can be used to advantage wherever long strip lengths are needed.
The AirStrip 4000 can be used to semi-strip a combined total of nine inches (229mm) from cable ranging from 0.094 to 0.625 in. O.D. (2.4 to 16mm O.D.). (Strip lengths of 4.5 in. x 4.5 in. (114mm x 114mm) are not available because of a small gap between cutterheads.) You can even get a semi-strip of up to 100 in. (1,000mm) on the leading end of the cable when you use the AirStrip 4000 in step-strip mode.
Cable can be cut in lengths from 2.0 in. to 8,333 ft. (51mm to 1,000m) in .01in. (0.1mm) increments at speeds up to 4,500 pieces per hour depending on length. The AirStrip 2700, 2900, and 4000 all provide high-speed, two-stage stripping on both ends of multi-conductor cables.
Specifications for the AirStrip 4000 |
|||||||||||||
|
Conductor Types
|
Stranded and solid copper. Single, multiple, and parallel conductors. Coaxial cable. | ||||||||||||
|
Insulation Types
|
PVC, cross-linked polyethylene, Teflon (TFE), Tefzel (ETFE), Kynar (PVDF), silicone rubber, fiberglass, Nylon, Mylar, Vulkene, neoprene, Hypalon, and other wrapped or extruded insulations. | ||||||||||||
|
Minimum Wire Size
|
10 AWG (6mm 2 ). 0.250 in. O.D. (6.3mm) standard. 0.094 in. O.D. (2.4mm) with small wire kit. 0.150 in. O.D. (4mm) with medium wire kit. |
||||||||||||
|
Maximum Wire Size
|
2 AWG (34mm 2 ). 0.470 in. O.D. (12mm) standard. 0.530 in. O.D. (13mm) with modification kit. 0.625 in. O.D. (15mm) with large wire kit. 0.625 in. wide (15mm) flat cable with modification kit. |
||||||||||||
|
Minimum Wire Length
|
Must have 2 in. (51mm) of insulation remaining. With short strip kit and special block, minimum length is 0.625 in. (15mm). |
||||||||||||
|
Maximum Wire Length
|
99,999.99 in. (999,999.9mm). | ||||||||||||
|
Minimum Strip Length
|
0.125 in. x 0.125 in. (3mm x 3mm). | ||||||||||||
|
Maximum Strip Length
|
Full strip: 0.250 in. x 0.250 in. (6mm x 6mm) standard. 0.625 in. x 0.625 in. (15mm x 15mm) on larger, more rigid wires. Semi-strip: combined strip lengths of 9 in. (229mm). Long semi-strip: 100 in. x 4 in. (1,000mm x 102mm) in step-strip mode. |
||||||||||||
|
Multiple-Stage Stripping
(For multi-conductor and coaxial cable.) |
Tooling is available for two-stage and three-stage stripping. | ||||||||||||
|
Blades
|
Die-type. | ||||||||||||
|
Strip Blocks
|
Open and closed blocks. | ||||||||||||
|
Existing Tooling
|
Can use standard tooling from previous versions of Model 4000. | ||||||||||||
|
Batch Size
|
0 to 99,999. | ||||||||||||
|
Number of Stored Programs
|
1,000 programs numbered 0 through 999. | ||||||||||||
|
Multi-Program Sequencing
|
Up to 1000 programs may be chained together as one sequence. Can have as many sequences as 1,000 program limit will allow. | ||||||||||||
|
Languages
|
English, French, German, Italian, Spanish, and Swedish are selectable from the keyboard. | ||||||||||||
|
Marker Controls
(Standard on all Models) |
Programmable end and continuous mark spacing with all Eubanks wire markers. | ||||||||||||
|
Wire Straightener
|
Standard on all models. | ||||||||||||
|
Display
|
2x40 vacuum fluorescent. | ||||||||||||
|
Options
|
• Small wire kit for wires 0.094 in. to 0.180 in.O.D. (2.4mm to 5mm). • Medium wire kit for wires 0.150 in. to 0.290 in. O.D. (4mm to 7mm). • Large wire kit for wires 0.375 in. to 0.625 in. O.D. (9mm to 15mm). • Short strip kit for processing wires with less than 2 in. (51mm) of insulation remaining. • RS-232 interface. |
||||||||||||
|
Accessories
|
Hot stamp marker, prefeed, coiling pan, and stacker available. May not be compatible with some older accessories. Contact factory for details. | ||||||||||||
|
Maximum Production Rates
(Production rates vary with wire type, insulation, wire length, strip length, wire size, feed speed, line air pressure and machine delay settings.) |
Maximum production rates for 10 AWG cable (6mm 2 ) with 0.500 in. x 0.500 in. semi-strip (12mm x 12mm). |
||||||||||||
| Electrical Requirements | 115 VAC, 10 A, 50/60 Hz . 230 VAC, 7 A, 50/60 Hz.. |
||||||||||||
| Compressed Air Requirements | 100 psi @ 28 cfm (690 kPa @ 14 l /s). Main air regulator and lubricator supplied. |
||||||||||||
| Dimensions | 48 in. W x 20 in. D x 15 in. H. (1,220mm W X 510mm D X 380mm H). |
||||||||||||
| Shipping Weight | 200 lbs (91kg). | ||||||||||||
| CE Certification | Yes. | ||||||||||||