 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Wire-wrap
applications require a special kind of expertise that involves the high-speed
handling of large volumes of small wire. Over the years, Eubanks machines
have cut and stripped enough small wire to circle the globe numerous times.
The AirStrip 2800 is designed specifically for wire-wrap applications. It will fully strip up to two inches (51mm) from each end of solid conductor wire. Wire sizes range from 32 to 20 AWG (0.03 to 0.52mm 2 ) with a maximum O.D. of 0.170 in. (4mm).
As with most other machines in the Eubanks AirLine, the AirStrip 2800 will strip many types of wrapped or extruded insulation including Teflon, Nylon, Kynar, and PVC.
Specifications for the AirStrip 2800 |
|||||||||||
|
Conductor Types
|
Stranded and solid copper. Single, multiple, and parallel conductors. Coaxial cable. | ||||||||||
|
Insulation Types
|
PVC, cross-linked polyethylene, Teflon (TFE), Tefzel (ETFE), Kynar (PVDF), silicone rubber, fiberglass, Nylon, Mylar, Vulkene, neoprene, Hypalon, and other wrapped or extruded insulations. | ||||||||||
|
Minimum Wire Size
|
32 AWG (0.03mm 2 ). | ||||||||||
|
Maximum Wire Size
|
20 AWG (0.52mm 2 ). 0.075 in. O.D. (1.9mm) standard. 0.170 in. O.D. (4mm) with large wire kit. |
||||||||||
|
Minimum Wire Length
|
Must have 0.5 in. (12mm) of insulation remaining. The remaining insulation can be as short as 0.312 in. (8mm) under special circumstances. | ||||||||||
|
Maximum Wire Length
|
99,999.99 in. (999,999.9mm). | ||||||||||
|
Minimum Strip Length
|
0.125 in. x 0.125 in. (3mm x 3mm) standard. 0.050 in. x 0.050 in. (1.3mm x 1.3mm) with special tooling. |
||||||||||
|
Maximum Strip Length
|
Full strip: 2 in. x 2 in. (51mm x 51mm) on solid conductor wire only. Semi-strip: 2 in. x 2 in. (51mm x 51mm) or any strip combination totaling 4 in. (102mm) on stranded or solid conductor wire. |
||||||||||
|
Multiple-Stage Stripping
(For multi-conductor and coaxial cable.) |
Tooling is available for two-stage and three-stage stripping. | ||||||||||
|
Blades
|
V-type, radius-V, and die-type. | ||||||||||
|
Strip Blocks
|
Closed blocks only. | ||||||||||
|
Existing Tooling
|
Can use standard tooling from previous versions of Model 2800. | ||||||||||
|
Batch Size
|
0 to 99,999. | ||||||||||
|
Number of Stored Programs
|
1,000 programs numbered 0 through 999. | ||||||||||
|
Multi-Program Sequencing
|
Up to 1,000 programs may be chained together as one sequence. Can have as many sequences as 1,000 program limit will allow. | ||||||||||
|
Languages
|
English, French, German, Italian, Spanish, and Swedish are selectable from the keyboard. | ||||||||||
|
Marker Controls
(Standard on all Models) |
Programmable end and continuous mark spacing with all Eubanks wire markers. | ||||||||||
|
Wire Straightener
|
Standard on all models. | ||||||||||
|
Display
|
2x40 vacuum fluorescent. | ||||||||||
|
Options
|
• Quick-change cutterhead for rapid tooling changes. • Large wire kit for wires up to 0.170 in. O.D. (4mm). • RS-232 interface. |
||||||||||
|
Accessories
|
Hot stamp marker, prefeed, coiling pan, and stacker available. May not be compatible with some older accessories. Contact factory for details. | ||||||||||
|
Maximum Production Rates
(Production rates vary with wire type, insulation, wire length, strip length, wire size, feed speed, line air pressure and machine delay settings.) |
Maximum production rates for 26 AWG wire (0.13mm 2 ) with 2 in. x 2 in. full strip (51mm x 51mm). |
||||||||||
| Electrical Requirements | 115 VAC, 10 A, 50/60 Hz 230 VAC, 7 A, 50/60 Hz | ||||||||||
| Compressed Air Requirements | 100 psi @ 24 cfm (690 kPa @ 12 l/s). Main air regulator and lubricator supplied. |
||||||||||
| Dimensions | 48 in. W x 20 in. D x 15 in. H. (1,220mm W x 510mm D x 380mm H). |
||||||||||
| Shipping Weight | 190 lbs (87kg). | ||||||||||
| CE Certification | Yes. | ||||||||||